Efecto de la temperatura del medio de enfriamiento por temple sobre las propiedades mecánicas de la aleación TiAl
Date
2019Author
Baeza Pérez, Rubén de JesúsAguilar Sánchez, Miriam
Garfias García, Elizabeth
Rangel Torres, Gilberto
Muñoz Andrade, Juan Daniel
Metadata
Show full item recordAbstract
Se analizaron las propiedades mecánicas sobre muestras de una aleación TiAl que fue solubilizada a 1100°C y enfriada en una aleación fundida o baño metálico con una composición Sn-21Bi estabilizado a tres diferentes temperaturas. Así mismo se analizó el cambio microestructural de la aleación y se evaluaron las propiedades mecánicas que dicho tratamiento generó, realizando ensayos de dureza y compresión, dicho tratamiento logró elevar la dureza hasta 4 veces en relación a la probeta testigo. Sin embargo, la mejor relación entre dureza y tenacidad se logra cuando solo se duplica la dureza y se conserva una buena tenacidad en el ensayo de compresión, esto debido a una microestructura mixta y con un porcentaje de fases alfa-beta equitativo. Esta microestructura es producto de las condiciones específicas durante el enfriamiento, con lo cual se demuestra que no solo hay una relación entre las propiedades mecánicas entre el material y su microestructura, sino también depende del porcentaje de fases presentes. Mechanical properties were analyzed on samples of a TiAl alloy that was solubilized at 1100°C and cooled in a molten alloy or metal bath with a Sn-21Bi composition stabilized at three different temperatures. The microstructural change of the alloy was analyzed and the mechanical properties that said treatment generated were evaluated, performing hardness and compression tests. The metalic bath treatment managed to raise the hardness up to 4 times in relation to the control specimen. However, the best relationship between hardness and toughness is achieved when only the hardness is doubled and a good toughness is retained in the compression test, this due to a mixed microstructure with a percentage of equitable alpha-beta phases. This microstructure is a product of the specific conditions during cooling, which demonstrates that there is not only a relationship between the mechanical properties and its microstructure, but also depends on the percentage of phases present.