Material superconductor Bi-2212 procesado a diferentes presiones y caracterizados por DRX, MEB y mediciones eléctricas
Date
2019Author
Martínez Ramírez, IsmaelDíaz Valdés, Elvia
Mejía García, Concepción
Guillen Cervantes, Ángel
Santoyo Salazar, Jaime
Metadata
Show full item recordAbstract
Este trabajo tuvo como propósito preparar muestras en volumen de composición nominal Bi₁․₆Pb₀․₄ Sr₂CaCu₂Oδ, a presiones de compactación diferentes para observar el efecto sobre sus propiedades estructurales y eléctricas. El material cerámico superconductor se preparó por reacción química en estado sólido, con presiones de compactación de 300 a 900 MPa. Se obtuvo el comportamiento eléctrico temperatura-resistencia (T-R) de las muestras, por el método de las cuatro puntas. Se caracterizaron estructuralmente por DRX y morfológicamente por MEB. Los patrones de difracción de rayos X muestran las reflexiones de la fase Bi-2212 y Bi- 2223 para todas las muestras. Los valores más altos de y Tc onset y Tc offset se observan en aproximadamente 111.6 K y 101.2 K, respectivamente para la muestra a 600 MPa. Las imágenes MEB muestran la morfología de los granos presentes en las muestras, observando disminución y uniformidad en la porosidad a 600 MPa. The purpose of this work was to prepare samples in bulk with nominal composition Bi₁․₆Pb₀․₄ Sr₂CaCu₂Oδ, at different compaction pressures to observe the effect on electrical and structural properties. The superconducting ceramic material was prepared by reaction in solid state, with compaction pressures from 300 to 900 MPa. The temperature- electrical resistance (T-R) behavior of the samples was obtained by the four-probe method. They were structurally characterized by XRD and morphologically by SEM. The X-ray diffraction patterns show the reflections of the Bi-2212 and Bi-2223 phases for all the samples, which vary slightly in intensity in relation to the formation of the superconducting phases. The highest values of Tc onset and Tc offset are observed approximately 111.6 K and 101.2 K, respectively for the sample compacted at 600 MPa. The images obtained by MEB show the morphology of the grains present in the samples, observing decrease and uniformity in the porosity at 600 MPa.