Estabilidad de catalizadores Ni soportados en ZrO₂ durante la hidrogenación selectiva de CO₂ hacia metano
Fecha
2016Autor
MARTINEZ SALCEDO, JEREMIASHERNANDEZ RAMIREZ, EDGAR
ALFARO HERNANDEZ, SALVADOR
VALENZUELA ZAPATA, MIGUEL ANGEL
Metadatos
Mostrar el registro completo del ítemResumen
En el presente trabajo se estudió el efecto del método de síntesis de soportes de ZrO₂, y el efecto de la carga metálica sobre la hidrogenación catalítica del CO₂ para la producción de metano. Los soportes utilizados fueron ZrO₂ comercial (ZrO₂-COM), y óxidos de zirconio sintetizados por los métodos de coprecipitación (ZrO₂-COP) y Sol-Gel (ZrO₂-SG). Para los catalizadores sintetizados se utilizaron cargas metálicas de níquel del 10 y 20% peso. La evaluación catalítica se llevó a cabo a presión atmosférica, en un intervalo de temperatura de 350-500°C, utilizando una relación molar estequiométrica de CO₂/H₂. Los resultados más sobresalientes se obtuvieron con los catalizadores 20%/NiZrO₂-COM y 20%/NiZrO₂-COP con conversiones de CO2 cercanas al 50% a temperaturas de 400°C. El catalizador 20%/NiZrO₂-COP presentó una buena estabilidad con una caída en la conversión de solo el 8% a un tiempo de corrida experimental de 200 horas. In this work the effect of synthesis method for ZrO₂ as support, and the effect of metal loading on the catalytic hydrogenation of CO₂ to methane production were studied. The supports were commercial ZrO₂ (ZrO₂-COM), and zirconia synthesized by the coprecipitation (ZrO₂-COP) and the Sol-Gel (ZrO₂-SG) methods. Nickel metal loading of 10 and 20 wt. % were impregnated on the synthetized catalyst. Catalytic evaluation test was performed at atmospheric pressure conditions, in a temperature range of 350-500°C, and using a stoichiometric CO₂/H₂ molar ratio. The most outstanding results were obtained with the catalysts 20%/NiZrO₂-COM and 20%/NiZrO₂-COP with CO2 conversions close to 50% at temperatures of 400°C. The catalyst 20%/NiZrO₂-COP showed a very good stability with a decrease in CO2 conversion of only 8% after 200 hours of experimental test.